ASTM D95

ASTM D95 • Water in Petroleum Products




Product Image Description -
AST 95-1 - Condenser, Leibig

AST 95-1 - Condenser, Leibig

Condenser has a 24/40 outer joint at the top and a 24/40 lower inner drip joint.
Jacket Length: 400mm
Joints: 24/40
Measure: Each
• ASTM Method: D95
Bidwell-Sterling Receiver

Bidwell-Sterling Receiver

Bottom of graduated section is round.
Joint Size: 24/40
Measure: Each
ASTM Method: D95
Part # Capacity Graduations
AST 95-2A 2mL 0.05 to 2 in 0.05mL Subdivisions
AST 95-5A 5mL 0.05 to 5 in 0.05mL Subdivisions
AST 95-10A 10mL 0.1 to 10 in 0.1mL Subdivisions
AST 95-25A 25mL 0.2 to 25 in 0.2mL Subdivisions
Bidwell-Sterling Receiver w/Return Tube

Bidwell-Sterling Receiver w/Return Tube

Bottom of graduated section is round. A return tube is added to allow excess solvent to return to the flask. This minimizes the chance of condensed moisture.
Joint Size: 24/40
Measure: Each
ASTM Method: D95
Part # Capacity Graduations
AST 95-2B 2mL 0.05 to 2 in 0.05mL Subdivisions
AST 95-5B 5mL 0.05 to 5 in 0.05mL Subdivisions
AST 95-10B 10mL 0.1 to 10 in 0.1mL Subdivisions
AST 95-25B 25mL 0.2 to 25 in 0.2mL Subdivisions
Dean-Stark Receiver

Dean-Stark Receiver

Bottom of graduated section is tapered.
Joint Size: 24/40
Measure: Each
ASTM Method: D95
Part # Capacity Graduations
AST 95-10C 10mL 0.1 to 2 in 0.1mL Subdivisions
2 to 10 in 0.2mL Subdivisions
AST 95-25C 25mL 0.1 to 2 in 0.1mL Subdivisions
2 to 25 in 0.2mL Subdivisions
Dean-Stark Receiver w/Return Tube

Dean-Stark Receiver w/Return Tube

Bottom of graduated section is tapered. A return tube is added to allow excess solvent to return to the flask. This minimizes the chance of condensed moisture.
Joint Size: 24/40
Measure: Each
ASTM Method: D95
Part # Capacity Graduations
AST 95-10D 10mL 0.1 to 2 in 0.1mL Subdivisions
2 to 10 in 0.2mL Subdivisions
AST 95-25D 25mL 0.1 to 2 in 0.1mL Subdivisions
2 to 25 in 0.2mL Subdivisions
Barrett Receiver

Barrett Receiver

Joint Size: 24/40
Measure: Each
ASTM Method: D95
Part # Capacity Graduations
AST 95-2E 2mL 0.05 to 2 in 0.05mL Subdivisions
AST 95-5E 5mL 0.2 to 5 in 0.2mL Subdivisions
AST 95-10E 10mL 0.1 to 10 in 0.1mL Subdivisions
AST 95-25E 25mL 0.2 to 25 in 0.2mL Subdivisions
10 to 25 in 0.2mL Subdivisions
Barrett Receiver w/Return Tube

Barrett Receiver w/Return Tube

Joint Size: 24/40
Measure: Each
ASTM Method: D95
Part # Capacity Graduations
AST 95-2F 2mL 0.05 to 2 in 0.05mL Subdivisions
AST 95-5F 5mL 0.2 to 5 in 0.2mL Subdivisions
AST 95-10F 10mL 0.1 to 10 in 0.1mL Subdivisions
AST 95-25F 25mL 0.2 to 25 in 0.2mL Subdivisions
10 to 25 in 0.2mL Subdivisions
Flask, Round Bottom

Flask, Round Bottom

Round bottom, HEAVY WALL single short neck flask.
• Joint: 24/40
• Measure: Each
• ASTM Method: D95
Part # Capacity
AST 95-3A 500mL
AST 95-3B 1000mL